Support Extract Plus

 

support_extract

The SUPPORT EXTRACT+ is an industrial ATEX-certified dedusting system for dry metallic dusts with an extraction capacity of 10,000 m3/h.

Since the extraction system is equipped with high-performance cartridge filters, which offer the maximum filter surface in the smallest spaces, this system is suitable for high dust loads and very fine dust particles. Thanks to the integrated automatic tapping device, manual intervention to clean the filter cartridges is no longer necessary, which helps to extend the efficiency and service life of the filters enormously. Should an explosion occur, it is discharged via flap valves and flameless pressure relief valves. In order to be able to extract from several extraction points with one system, a distributor is supplied ex works, so the process air can be reliably extracted from up to three extraction points.

Спецификации и опции

  • Airjet

    • Innovative cartridge filter system from Aigner with automatic cleaning and dust discharge • Maintenance-free explosion protection using flameless pressure relief

  • Variable hose connection

    With 1 x 400 mm or 3 x 250 mm diameter and hose lengths up to 10 m

  • Compressor system (optional)

    With internal compressed-air supply for fully automatic filter cleaning

  • Extruding screw

    • With rotary valve for continuous discharge of dust • Discharging device for big bags and boxes

  • High-performance fan

    High suction performance of up to 10,000 m3/h (for a hose length of 10 m)

  • BLUECTRL

    • Безжичен, децентрализиран, IT-базиран контрол и контрол на процеси с помощта на таблет (СИН ПАНЕЛ) • Всичко-в-едно решение за всички системни конфигурации на BLUELINE

  • Airjet

    • Innovative cartridge filter system from Aigner with automatic cleaning and dust discharge • Maintenance-free explosion protection using flameless pressure relief

  • Variable hose connection

    With 1 x 400 mm or 3 x 250 mm diameter and hose lengths up to 10 m

  • Compressor system (optional)

    With internal compressed-air supply for fully automatic filter cleaning

  • Extruding screw

    • With rotary valve for continuous discharge of dust • Discharging device for big bags and boxes

  • High-performance fan

    High suction performance of up to 10,000 m3/h (for a hose length of 10 m)

  • Гофриран колан с щифтове

    Осигурете транспортирането на насипни материали при наклон на лентата от 35°

  • BLUECTRL

    • Безжичен, децентрализиран, IT-базиран контрол и контрол на процеси с помощта на таблет (СИН ПАНЕЛ) • Всичко-в-едно решение за всички системни конфигурации на BLUELINE

Обща маса
6,400 kg
Размери*
6050 x 2450 x 2700 мм
Присъединен товар
3N ~ 400 V / 63 A / 50 Hz
Обща маса
6,400 kg
Размери
6050 x 2450 x 2700 мм
Присъединен товар
3N ~ 400 V / 63 A / 50 Hz

Брошура

bg_BGBG