Systemen voor het recyclen en terugwinnen van schroot

Individually adapted scrap recovery lines.

Each business requires individual solutions. SIMVIC has developed a set of high-quality machines and components for the construction of efficient production lines in the field of recovery, recycling and separation of metal scrap.

Perfectly matched elements allow for the construction of the expected installation, and when the need arises, it is possible to rebuild the installation to meet the current needs.

Specificaties & Opties

The SIMVIC system includes elements such as:

Pre-shredders for shredding of bulky materials
Conveyor belt
Double flattening-feeding rollers
Hammer mill for shredding of scrap metal (Shredder)
Electrical power and control system
Magnetic separation systems
Z-box separation system
Non-ferrous metal separation systems
Eddy current separators
Induction separators
Dry or wet dedusting systems
Feeder-collector system

PLC control

The entire recovery line is controlled by a central PLC system with full monitoring and control room. The system manages the electrics, hydraulics and other systems of the entire production line. Control cabinets are protected against flooding and dust.
The system includes seven control cabinets outside the dust extraction system, one of them is a PLC storage. Besides, it has seven local operation boxes installed on different machines that enable start, stop and emergency shutdown for the unit.
Working conditions

The lowest unit temperature is -10 ℃.
‍Electrical and plumbing rooms should be made and equipped according to the manufacturer's recommendations.
‍Current load (voltage and frequency to be confirmed by the buyer) Electricity source: High voltage: three-phase 6KV / 50Hz Low voltage: three-phase 400V / 50Hz

The SIMVIC system includes elements such as:

Pre-shredders for shredding of bulky materials
Conveyor belt
Double flattening-feeding rollers
Hammer mill for shredding of scrap metal (Shredder)
Electrical power and control system
Magnetic separation systems
Z-box separation system
Non-ferrous metal separation systems
Eddy current separators
Induction separators
Dry or wet dedusting systems
Feeder-collector system

PLC control

The entire recovery line is controlled by a central PLC system with full monitoring and control room. The system manages the electrics, hydraulics and other systems of the entire production line. Control cabinets are protected against flooding and dust.
The system includes seven control cabinets outside the dust extraction system, one of them is a PLC storage. Besides, it has seven local operation boxes installed on different machines that enable start, stop and emergency shutdown for the unit.
Working conditions

The lowest unit temperature is -10 ℃.
‍Electrical and plumbing rooms should be made and equipped according to the manufacturer's recommendations.
‍Current load (voltage and frequency to be confirmed by the buyer) Electricity source: High voltage: three-phase 6KV / 50Hz Low voltage: three-phase 400V / 50Hz

Systemen voor het recyclen en terugwinnen van schroot

Individually adapted scrap recovery lines.

The SIMVIC system includes elements such as:

PLC control

Working conditions

The SIMVIC system includes elements such as:

PLC control

Working conditions