PSX-versnipperaar

Our SIMVIC PSX Shredder is an affordable and durable hammer mill for processing all types of light scrap metal. A simple chassis made of tough, welded construction steel is a robust foundation for processing all scrap types. Coupled with minimal electronics, working with the PSX Shredder is a guarantee of time saved and maintenance costs decreased. Available as a stand alone unit or as a part of our Modular Recycling and Recovery Line.

Specificaties & Opties

The main components of the PSX

Feeding Conveyor (Apron)
Feeding Roller
Scrap Shredder (Hammer Mill)
Main motor and controlling cabinet
Hydraulic Unit Box
Shredding process

After leaving the Feeding Conveyor scrap metal is initially flattened by a feeding roller. Using the feeding roller for initial processing makes so that rotor is not susceptible to overload. This results in a smoother production process.

Rotor

7 center discs
2 alloy steel end discs 4 heat treated alloy steel hammer pins and 10 manganese hammers
Heat-treated alloy steel middle shaft
The contact surfaces between the rotor discs and the hammer pins are protected by hardened and tempered protective covers
Any space between the discs that does not contain a hammer is protected by hammer pin guards‍
The hammer punch makes it easier to remove the pins when replacing hammers and pads
The power unit

The engine is the input source of power for the shredder
The temperature sensor is mounted in the motor bearing together with the dehumidification device
All engines are soft-starting which lowers the start up energy demands
Motors used depend on individual needs of the client

The main components of the PSX

Feeding Conveyor (Apron)
Feeding Roller
Scrap Shredder (Hammer Mill)
Main motor and controlling cabinet
Hydraulic Unit Box
Shredding process

After leaving the Feeding Conveyor scrap metal is initially flattened by a feeding roller. Using the feeding roller for initial processing makes so that rotor is not susceptible to overload. This results in a smoother production process.

Rotor

7 center discs
2 alloy steel end discs 4 heat treated alloy steel hammer pins and 10 manganese hammers
Heat-treated alloy steel middle shaft
The contact surfaces between the rotor discs and the hammer pins are protected by hardened and tempered protective covers
Any space between the discs that does not contain a hammer is protected by hammer pin guards‍
The hammer punch makes it easier to remove the pins when replacing hammers and pads
The power unit

The engine is the input source of power for the shredder
The temperature sensor is mounted in the motor bearing together with the dehumidification device
All engines are soft-starting which lowers the start up energy demands
Motors used depend on individual needs of the client


Type	Output (T/h)	Motor Power (KW)	Feeding Width (mm)
PSX-5070	8~15	560 (750KM)	1800
PSX-6080	15~30	750-1120 (1000 – 1500 KM)	2000
PSX-80104	30~55	1500-2200 (2000-3000KM)	2600
PSX-88104	80~100	3000 (4000KM)	2600
PSX-98104	120~160	4410(6000KM)	2600

PSX-versnipperaar

The main components of the PSX

Shredding process

Rotor

The power unit

The main components of the PSX

Shredding process

Rotor

The power unit