PSX Shredder

PSX-Shredder

Our SIMVIC PSX Shredder is an affordable and durable hammer mill for processing all types of light scrap metal. A simple chassis made of tough, welded construction steel is a robust foundation for processing all scrap types. Coupled with minimal electronics, working with the PSX Shredder is a guarantee of time saved and maintenance costs decreased. Available as a stand alone unit or as a part of our Modular Recycling and Recovery Line.

Specifications  & Options

  • The main components of the PSX

    Feeding Conveyor (Apron)
    Feeding Roller
    Scrap Shredder (Hammer Mill)
    Main motor and controlling cabinet
    Hydraulic Unit Box

  • Shredding process

    After leaving the Feeding Conveyor scrap metal is initially flattened by a feeding roller. Using the feeding roller for initial processing makes so that rotor is not susceptible to overload. This results in a smoother production process.

  • Rotor

    7 center discs
    2 alloy steel end discs 4 heat treated alloy steel hammer pins and 10 manganese hammers
    Heat-treated alloy steel middle shaft
    The contact surfaces between the rotor discs and the hammer pins are protected by hardened and tempered protective covers
    Any space between the discs that does not contain a hammer is protected by hammer pin guards‍
    The hammer punch makes it easier to remove the pins when replacing hammers and pads

  • The power unit

    The engine is the input source of power for the shredder
    The temperature sensor is mounted in the motor bearing together with the dehumidification device
    All engines are soft-starting which lowers the start up energy demands
    Motors used depend on individual needs of the client

  • The main components of the PSX

    Feeding Conveyor (Apron)
    Feeding Roller
    Scrap Shredder (Hammer Mill)
    Main motor and controlling cabinet
    Hydraulic Unit Box

  • Shredding process

    After leaving the Feeding Conveyor scrap metal is initially flattened by a feeding roller. Using the feeding roller for initial processing makes so that rotor is not susceptible to overload. This results in a smoother production process.

  • Rotor

    7 center discs
    2 alloy steel end discs 4 heat treated alloy steel hammer pins and 10 manganese hammers
    Heat-treated alloy steel middle shaft
    The contact surfaces between the rotor discs and the hammer pins are protected by hardened and tempered protective covers
    Any space between the discs that does not contain a hammer is protected by hammer pin guards‍
    The hammer punch makes it easier to remove the pins when replacing hammers and pads

  • The power unit

    The engine is the input source of power for the shredder
    The temperature sensor is mounted in the motor bearing together with the dehumidification device
    All engines are soft-starting which lowers the start up energy demands
    Motors used depend on individual needs of the client

Type
Output (T/h)
Motor Power (KW)
Feeding Width (mm)
PSX-5070
8~15
560 (750KM)
1800
PSX-6080
15~30
750-1120 (1000 - 1500 KM)
2000
PSX-80104
30~55
1500-2200 (2000-3000KM)
2600
PSX-88104
80~100
3000 (4000KM)
2600
PSX-98104
120~160
4410(6000KM)
2600
en_USEN