Support Extract Plus

 

support_extract

The SUPPORT EXTRACT+ is an industrial ATEX-certified dedusting system for dry metallic dusts with an extraction capacity of 10,000 m3/h.

Since the extraction system is equipped with high-performance cartridge filters, which offer the maximum filter surface in the smallest spaces, this system is suitable for high dust loads and very fine dust particles. Thanks to the integrated automatic tapping device, manual intervention to clean the filter cartridges is no longer necessary, which helps to extend the efficiency and service life of the filters enormously. Should an explosion occur, it is discharged via flap valves and flameless pressure relief valves. In order to be able to extract from several extraction points with one system, a distributor is supplied ex works, so the process air can be reliably extracted from up to three extraction points.

Specifications  & Options

  • Airjet

    • Innovative cartridge filter system from Aigner with automatic cleaning and dust discharge • Maintenance-free explosion protection using flameless pressure relief

  • Variable hose connection

    With 1 x 400 mm or 3 x 250 mm diameter and hose lengths up to 10 m

  • Compressor system (optional)

    With internal compressed-air supply for fully automatic filter cleaning

  • Extruding screw

    • With rotary valve for continuous discharge of dust • Discharging device for big bags and boxes

  • High-performance fan

    High suction performance of up to 10,000 m3/h (for a hose length of 10 m)

  • BLUECTRL

    • Wireless, decentralised, IT-based control and process control using a tablet (BLUE PANEL) • All-in-one solution for all BLUELINE system configurations

  • Airjet

    • Innovative cartridge filter system from Aigner with automatic cleaning and dust discharge • Maintenance-free explosion protection using flameless pressure relief

  • Variable hose connection

    With 1 x 400 mm or 3 x 250 mm diameter and hose lengths up to 10 m

  • Compressor system (optional)

    With internal compressed-air supply for fully automatic filter cleaning

  • Extruding screw

    • With rotary valve for continuous discharge of dust • Discharging device for big bags and boxes

  • High-performance fan

    High suction performance of up to 10,000 m3/h (for a hose length of 10 m)

  • Corrugated edge belt with cleats

    Secure bulk material transport at 35° belt inclination

  • BLUECTRL

    • Wireless, decentralised, IT-based control and process control using a tablet (BLUE PANEL) • All-in-one solution for all BLUELINE system configurations
Total mass
6,400 kg
Dimensions*
6,050 x 2,450 x 2,700 mm
Connected load
3N ~ 400 V / 63 A / 50 Hz
Total mass
6,400 kg
Dimensions
6,050 x 2,450 x 2,700 mm
Connected load
3N ~ 400 V / 63 A / 50 Hz

Brochure

en_USEN
en_USEN nl_NLNL fr_FRFR bg_BGBG