Separation Systems

Separation-Systems

Individual separation systems

Individually designed ferrous and non-ferrous separation systems. SIMVIC prides itself as a made-to-fit equipment manufacturer. In line with this ethos we have developed a range of basic separation segments and continue to add more. Perfectly matched elements allow you to build the needed installation, and when the need arises, it is possible to rebuild and expand the installation to meet the current needs.

Specifications  & Options

  • These are just a few elements that can make up the SIMVIC separation system:

    Chain plate feeding systems
    Belt conveyors
    Inclined belt conveyors
    Trommels
    Air separation
    Eddy Current separation
    Ferrous conveyors
    Fluff conveyors
    Induction sorters
    Vibrating feeders
    ESS induction
    Electric control systems
    Compressed air systems
    De-dusting systems

  • Working conditions

    The lowest temperature for the equipment is -30℃
    The electric and hydraulic rooms should install measures of cold protection and dust-proofing. The window of the control room should be equipped with bulletproof windows.
    If the temperature is above 5℃, the L-HM32 or L-HM46 hydraulic oil can be used. If below 5℃, it is suggested to
    use L-HV32 or L-HV46 hydraulic oil Power load; voltage and frequency to be confirmed by buyer ‍

  • Working conditions

    The lowest unit temperature is -10 ℃.
    ‍Electrical and plumbing rooms should be made and equipped according to the manufacturer's recommendations.
    ‍Current load (voltage and frequency to be confirmed by the buyer) Electricity source: High voltage: three-phase 6KV / 50Hz Low voltage: three-phase 400V / 50Hz

  • These are just a few elements that can make up the SIMVIC separation system:

    Chain plate feeding systems
    Belt conveyors
    Inclined belt conveyors
    Trommels
    Air separation
    Eddy Current separation
    Ferrous conveyors
    Fluff conveyors
    Induction sorters
    Vibrating feeders
    ESS induction
    Electric control systems
    Compressed air systems
    De-dusting systems

  • Working conditions

    The lowest temperature for the equipment is -30℃
    The electric and hydraulic rooms should install measures of cold protection and dust-proofing. The window of the control room should be equipped with bulletproof windows.
    If the temperature is above 5℃, the L-HM32 or L-HM46 hydraulic oil can be used. If below 5℃, it is suggested to
    use L-HV32 or L-HV46 hydraulic oil Power load; voltage and frequency to be confirmed by buyer ‍

  • Working conditions

    The lowest unit temperature is -10 ℃.
    ‍Electrical and plumbing rooms should be made and equipped according to the manufacturer's recommendations.
    ‍Current load (voltage and frequency to be confirmed by the buyer) Electricity source: High voltage: three-phase 6KV / 50Hz Low voltage: three-phase 400V / 50Hz

en_USEN